Practical importance. The analytical and numerical results obtained can be used in the study of the stress state and, respectively, to evaluate the strength and stiffness of curvilinear tubular structural elements, in particular, the pipeline bends and pipes of economizers. The purpose. Investigation of the temperature field and the thermoelastic state of the curvilinear rod with a tubular cross-section caused by it; analysis of the influence of geometrical and thermophysical parameters on the characteristics of its temperature field, as well as on the forces and moments in it. The research method. The object of research is the curvilinear rod with a tubular crosssection, which is in the conditions of convective heat exchange with the external and internal environments. The thermal conductivity equation for a large curvature rod was used to describe its temperature field. For determining the characteristics of the stress-strain state due to the described temperature field, the equations of thermal elasticity of curvilinear rods in displacements were used; the case was analyzed when radial and tangential displacements are absent in the extreme crosssections of the curvilinear part of the rod, and there are no turns of these cross-sections. Results. The studies have shown that the specific coefficients of heat transfer of the outer and inner surfaces of the rod affect its stress state in a different way; as the heat transfer coefficient from the outer surface increases, the absolute values of the longitudinal and transverse forces, as well as of the bending moment, decrease, and with the increase of the heat transfer coefficient from the inner surface, they increase. In contrast to the stress problem, in the case of heating, the value of the bending moment in a certain cross-section of a curvilinear rod depends on the geometrical parameters of the cross-section. The scientific novelty. Analytical-numerical method shows for the first time that there is such a cross-section in which the heat-induced bending moment changes its sign; the position of this cross-section depends on the curvature of the axis, the thickness of the wall, the bend angle of the curvilinear part of the rod and practically does not depend on the specific coefficients of heat transfer from its inner and outer surfaces. There are values of the bend angle at which the bending moment and transverse force in the curvilinear part of the rod reach their maximums.

 Наукова періодика України 

---

Додаткова інформація про автора(ів) публікації:
(cписок формується автоматично, до списку можуть бути включені персоналії з подібними іменами або однофамільці)

• Войтович Микола Миколайович (1940–2020) (фізико-математичні науки)
• Величко Людмила Анатоліївна (державне управління)

  Якщо, ви не знайшли інформацію про автора(ів) публікації, маєте бажання виправити або відобразити більш докладну інформацію про науковців України запрошуємо заповнити "Анкету науковця"